
On-line Oil Filtration For Load Tap Changers
Regulators and Circuit Breakers
The TP2EC is designed for permanent
mounting on electrical apparatus to remove carbon and other contaminants from insulating
oil without interrupting service. This unit helps prevent premature failure by keeping the
dielectric strength of the oil high.
... 1852.pdf
On-Line Oil Filtration
for Load Tap Changer Compartments
The TP3 was developed in response to
the utility industrys desire to reduce operation and maintenance costs and increase
system reliability. On-line oil filtration has proven to be an effective means of
combating LTC problems. Tap changers retrofitted with a TP3 enjoy the following:
Consistent high oil dielectric
strength
Extended maintenance/inspection intervals
Reduced contact wear and coking
Extended oil life
Reduced contact erosion via reduced restrikes during tap changing
... 1775.pdf
Tap Changer Filter System
TP3AD
The TP3AD was developed in
response to the utility industrys desire to reduce operation and maintenance costs
and increase system reliability. On-line oil filtration has proven to be an effective
means of combating LTC problems. Tap changers retrofitted with a TP3AD enjoy the
following:
Consistent high oil dielectric
strength
Extended maintenance/inspection intervals
Reduced contact wear and coking
Extended oil life
Reduced contact erosion via reduced restrikes during tap changing
... 1823.pdf
On-Line Oil
Filtration for Load Tap Changer Compartments Tap Changer Filter System TP3CE
The TP3CE was developed in response
to the utility industrys desire to reduce operation and maintenance costs and
increase system reliability. On-line filtration has proven to be an effective means of
combating LTC problems. Tap changers retrofitted with a TP3CE enjoy the following:
Consistent high oil dielectric
strength
Extended maintenance/inspection intervals
Reduced contact wear and coking
Extended oil life Reduced contact erosion via reduced re-strikes during tap
changing
... 1917.pdf
On-Line Oil Filtration
For Load Tap Changer Compartments Tap Changer Filter System TP-5E
The TP-5E is designed for permanent
mounting on load tap changers to remove carbon and other contaminants from insulating oil,
without interrupting service. This unit helps prevent premature tap changer failure by
keeping the dielectric strength of the oil high.
... 1762.pdf
Description
Conventional LTC filters are only
effective in removing particulate solids contamination over the course of their service
life. In a free breathing LTC compartment, moisture levels of the oil are often in excess
of 40 ppm total water. This moisture, combined with normal operating heat, cause oil
breakdown to occur at accelerated rates. Consistent removal of dissolved water extends
service life of the oil and increases the benefits of LTC filtration systems.
Applications
Use SD-718P3
cartridges to maintain dielectric strength of LTC oil in new condition
Install SD-718P3 in new LTC filtration systems
Retrofit existing LTC filter systems with SD-718P3 cartridges
Replace standard 618/718 sized filter cartridges with SD-718P3 cartridge
Cutaway shows double wire
backed microglass pleat block around inner packed Superdri media.
... 1808.pdf
  
... easy access to our filtration toolbox
process | home | aviation & fuel | separation | air-gas | dust collection | hvac | aftermarket

sales@fischer-robertson.com
Fischer-Robertson, Inc. 3890 Symmes
Road Hamilton, Ohio 45015
p: 513-860-3445 f: 513-860-4744
© copyright 2006 |